1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE

C-4448

1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE C-4448

1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE

REF. NO. C-4448

MFG: 2008

(360”) 9,144mm Swing

(204”) 5,181mm Maximum Height Under Tool Bolders

23 ¼” Depth Of Bed Under Outer Table Track

(300”) 7,620mm Table Diameter

(24”) 609mm Depth Of Table Over Outer Track

(204”) 5,181mm Outer Track Outside Diameter

(12”) 304mm Outer Track Width

(60”) 1,524mm Inner Track Outside Diameter

(6”) 152mm Inner Track Width

(204”) 6,096mm Table Gear Diameter (240T. 1D.P. HELICAL)

(10”) 254mm Face Of Table Gear

(48”) 1,219mm Face Of Crossrail

(69”) 1,752mm Depth Of Crossrail Between Housings

12 ½” Thickness Of Crossrail At housings

(54”) 1,371mm Length Of Crossrail Bearing On Housings

(120”) 3,048mm Bar Travel

(14”) 355mm Bar Across Flats Octagon

(96”) 2,438mm Length Of Bar Cap On Swings

2 ½” Sq. Size Of Tools

(50”) 1,270mm Minimum Distance Between Bar Centers

(66”) 1,676mm Minimum Diameter (Both Bars Can Enter Simultaneously)

45 Degree Swivel Of Bars Either Side Of Vertical

(75” )1,905mm Saddle Bearing On Crossrail

(4”) 101mm Diameter Of Cross Feed Screws In CRossrail

2 ½” Diameter Of Bar Feed Shafts In Crossrail

(16”) 406mm Housing Body Thickness

(48”) 1,219mm Housing Body Thickness At Counterweight Chamber

(156”) 3,962mm Housing Bearing Length Of Extensions

Housing Height: (348”) 8,839mm

(5”) 127mm Diameter Of Front Elevating Screws

(4”) 101mm Diameter Of Rear Elevating Screws

Good Working Condition

Price - P.O.R.

$1795000 In stock
1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE 1 – USED (300”) 7,620mm X (360”) 9,144mm NILES CNC DOUBLE COLUMN VERTICAL TURNING LATHE
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt