1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE

C-3895

1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE C-3895

1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE

REF. NO. C-3895

S/N 48270

New 1970

12.5” Hole Thru Spindle

32” Rated Swing Over Bedways

32.5” Actual Swing Over Bed Ways

23” Swing Over Cross Slide

252” Distance Between Centers

120” Distance Between Centers

5 To 600 RPM Spindle Speeds Range

(55) Carriage Longitudinal Feeds: .0025 To .160 IPR

(55) Thread Changes Ranging From 1 To 64 TPI

Complete With 40 HP Main Motor, Sony Digital Readouts, Left Hand Side

Lathe Bed With 10’ Center Distance, Right Hand Side Lathe Bed With

21’ Center Distance, Tailstock On Right Hand Side, (2) 24” Cushman

4-Jaw Independent Chucks With 12-5/8” Bore – 20” A1 Spindle Nose,

(2) Carriages On Right Hand Side Of Bed (1) Regular Lathe Carriage And

One Boring Carriage, (1) Regular Lathe Carriage On Left Hand Side Of

Bed, (2) Steady Rest’s, (2) 4-Way Tool Post’s, Hard Ways, Power Rapid

Traverse, And Percentage Load Meter.

Price FOB Cincinnati, Ohio P.O.R.

NOTE: This Machine Appears To Be In Very Good Condition As Taken From Service At Major Jet Engine Company In Cincinnati. This Lathe Has The Added Advantage Of Being Able To Bore A Thru-Hole In Solid Shafts While Maintaining Jet Engine Accuracies. This Machine Will Basicaly Handle both The Inside And Outside Of A Job With One Set-Up.

$239500 In stock
1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE 1 – USED 32” X 252/120” (21’/10’) LODGE & SHIPLEY “SUPERTURN” 3220w DUAL SIDE HOLLOW SPINDLE ENGINE/BORING LATHE

 

 

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt