1 – USED 64″ BULLARD “CUTMASTER” VERTICAL TURRET LATHE

SKU C-6089
In stock
1
Product Details
  • Warranty: Includes all parts and labor for six months on single shift basis. Electrical components are covered with manufacturer’s warranty, typically 90 days.
  • The range capabilities of the units are detailed as follows:
  • Figure #5
  • Thread Cutting obtainable with proper change gears:
  • 2,3,4,5,6,7,8,9,10,11,11.5,12,14,16,18, T.P.I. (We can also configure to give 1 TPI on
  • special application)
  • Drum Scoring obtainable with proper change gears:
  • 1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,13/16,7/8,15/16
  • 1,1 1/16, 1 1/8 Pitch
  • Angular Turning obtainable with proper change gears:
  • 1 deg 47 min, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5,
  • 12, 12.5, 13, 13.5, 14 deg 2 min, 14.5, 15, 15.5, 16, 16.5, 17, 17.5, 18, 18.5, 18 deg 26 min, 19,
  • 19.5, 20, 20 deg 28 min, 21, 21.5, 22, 22.5, 23, 23.5, 24, 24.5, 25, 25.5, 26, 26 deg 34 min, 27,
  • 27.5, 28, 28.5, 29, 29.5, 30, 30.5, 30 deg 58 min, 31.5, 32, 32.5, 33, 33.5, 34, 34 deg 28 min, 35,
  • 35 deg 28 min, 35 deg 58 min, 36.5, 37, 37.5, 38, 38.5, 39, 39.5, 39 deg 58 min, 40.5, 41, 41.5,
  • 42, 42.5, 43, 43.5, 44, 44.5, 45
  • THREADING, DRUM SCORING, & ANGLE TURNING (TDA) ATTACHMENT
  • B. Installation of Trabon Automatic Lubrication System
  • We propose the installation of a Trabon Lubrication
  • System covering the conversion of all hand oil points to pressurized lubrication. The system will be composed of a self contained oil reservoir, five block feeder assembly, master distribution block, electrical pump with high pressure blowout assembly, solid state controller and remote audio alarm. The system is designed taking into account surface areas for each point of lubrication and then sizing individual block units to deliver the proper amount of lubricant. A systematic diagram as per figure #5 is supplied with the machine.
  • C. Installation of Digital Readout System
  • As Newall is our preferred manufacturer, we are pleased to quote as follows: Newall Digital Readout System.
  • 1. Supply Newall Digital Readout System
  • Newall system to include:
  • * Newall DP700 – 2 axis display * Switchable Resolution
  • * Absolute / Incremental Mode * Zero Reset
  • * Home Reference * Preset Features
  • * Inch / Metric switchable * Arc Contouring
  • * Downloadable Software Upgrades * Feed Rate Display
  • * Programmable Memory * Taper Calculations
  • * Centerline and Linear Error Compensation * 3 Year Warranty
  • * Spherosyn Scales with .0005″/.0002″ Resolution.
  • 2. Manufacture all necessary brackets for installation. Machine slides for installation
  • of brackets to facilitate ease of traming units.
  • 3. Supply all necessary electrical wiring, connectors and manuals.
  • 4. Scales to be sized to include full range of travel plus safety dimension.
  • F. Installation of an Outside Motor Driven Pump System
  • The installation of a direct motor driven hydraulic pump is an option that may be considered. This option allows servicing of the hydraulic pump without removal from the machine.
  • In addition to the equipment supplied above, any machine rebuilt by us would be shipped with a complete documentation package that would include:
  • 1. Operators Manual
  • 2. Preventive Service Manual
  • 3. Lubrication Guidelines and Hydraulic oil specifications
  • 4. Installation Diagram and foundation print
  • 5. Repair Parts Manual
  • 6. All auxiliary documentation (i.e. – readouts)
  • We hope you find this quotation of interest and that we may be of service. If you have any questions or require additional information, please do not hesitate to contact us.
Save this product for later